Shopping Basket

Shopping Basket

Items: 0
Subtotal: $0.00
Note: All prices in US Dollars
Order Now
Click Add to Cart to order this product
5/8" x 3/4"  Water Meter

5/8" x 3/4" Water Meter

5/8" x 3/4"  Water Meter
Click to enlarge image(s)
Epoxy coated bronze water meter. Connections are external straight threads (non-tapered meter threading). All meters come with full bronze meter coupling sets bringing you to Male NPT. The register's circumference shows individual gallons down to increments of tenths of gallons for precision reading. Large red spinning trickle indicator is excellent for leak detection. Accuracy within 1-1/2% in the range between the minimum and maximum flow on the chart.

The Direct Read Register has a hermetically sealed nylon casing with a 5 mm tempered glass lens. The totalizer wheels are large and easy to read. The register assembly is easily removable and replaceable if needed. Contains a magnetic drive designed to facilitate coupling between the measuring chamber and the register assembly. Each register clearly show's it's applicable meter size.

Installation: Meter may be installed either horizontally or vertically with the register facing any direction. Mater may be installed at an angle as long at meter is placed at least 1 foot after the bend. Male NPT threads are standard pipe threads. See link below for a diagram of suggested installation.

NOTE: A kit is available to adapt this water meter for use with a hose for filling tanks, etc. See item#.DLJ-Plus
Flow Rating (gpm) 20
Continuous Flow (gpm) 20
Normal Flow Range (gpm) 1 - 20
Low Flow (gpm) 1/4
Maximum Pressure (psi) 150
Maximum Temperature (°F) 122
Sweep Hand Registers (gallons) 10
Register Capacity (Millions of gallons) 10
Size 7 1/2" long x 3 3/4" wide x 4 1/8" tall
Features Benefits
Direct Read Register Hermetically sealed nylon casing with a 5 mm tempered glass lens.
Large Totalizer Wheel Easy to read with sweep hand designed to not interfere with the odometer reading. Excellent for leak detection.
Magnetic Drive The magnetic drive design facilitates coupling between the measuring chamber and the register assembly.
Pulse Output Available with a dry contact reed switch pulse outlet. Requires external DC power, 4 watts, 30VDC max. Contact closure is 1 pulse/gallon.
Easy Maintenance The register assembly is easily removed and replaced. The integral strainer on the measuring assembly prevents foreign debris damage and can be cleaned.

We Offer The Best Selection Of Septic Maintenance Tools

Welcome to You will notice that we have a very extensive line of wastewater treatment equipment. If you have been looking for a respirator mask or safety glasses, you will find we have what you need, We offer a variety of safety face shields, grab samplers, septic air compressor, septic dipstick, an effluent filter, septic maintenance part, a pressure relief valve, subsurface drip tubing, effluent pumps and so much more! When it comes to septic system treatment, we are your experts. Take a look around our site and find the septic system product that best suits your style and needs. Take a look at each product and click on any picture to find more information.

Thank you for visiting!

Home Page  ·   Contact Us  ·   Links  ·   Shipping Information  ·   About Us  ·   Search    
View Our Privacy Policy  ·   Site Map  ·   FAQ's  ·   Subsurface Drip Tubing  ·   Water Meters  ·   Tools    
Sampling Equipment  ·   Safety & Personal Protection  ·   Chemical Analysis  ·   Spray Heads  ·   Valves  ·   Spin Clean Filters    
Chemical Analysis  ·   Chlorine Test Kit  ·   Safety & Personal Protection  ·   Nitrile Coated Gloves  ·   Sampling Equipment    
Small Cleaning Brush  ·   Filters  ·   Septic Tank Filter  ·   Spray Heads  ·   Sprinkler Head Replacement    
Subsurface Drip Tubing & Fittings  ·   Water Dripper  ·   Tools  ·   Septic Tools  ·   Valves    
Water Flow Control Valve  ·   Water Meters  ·   Water Pressure Meter    

Septic Maintenance Online Copyright © Cemel, Inc.